7437b432071ad07562619438fac62ee9f17bc55a
2872
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 edde746
|
439ae1d733 |
perf(detail): paint a show before its on-deck episode is looked up
Jellyfin has no equivalent of Plex's bundled `?includeOnDeck=1`, so a show detail open chained `/Shows/NextUp` behind the item fetch and the screen sat on a spinner for both round trips. The second one is not needed to paint: everything except the play button's episode label comes from the item. `fetchItemWithOnDeck` now takes an `onItemReady` callback and invokes it as soon as the item is known, when that is strictly before on-deck settles. Plex returns both together and never invokes it. Phone and desktop only. TV keeps its own reveal gate — `_isTvDetailReadyToReveal` holds the foreground at opacity 0 until extras, related hubs, seasons and the first episode page have all loaded, and those still run after the on-deck lookup settles, so TV sees no change. Both halves are pinned by tests. Measured on a remote Jellyfin server, 15 interleaved show-detail opens per version: time to content 1264ms -> 1042ms (-18%), with the rest of the load unchanged. Seasons and extras deliberately still start after the whole lookup settles. Starting them at the early paint measured worse (time to settled +21%) because they contend with the on-deck request instead of overlapping it — the same reason `/Shows/NextUp` is not fired in parallel with the item fetch. That trade-off is also why TV was left alone rather than being unblocked by moving those loads earlier. Two ordering hazards the early paint introduces, both covered by `media_detail_screen_test.dart`: - The early call must not write on-deck. `_loadFullMetadata` runs again after playback, and clearing there would blank the play button for the length of the round trip. `onDeckSettled` marks the authoritative write, so a reload that finds the series finished still clears it. - A settled empty on-deck must not drop the episode-derived fallback that `_ensureFallbackOnDeckEpisode` supplies. close #1784 |
||
|
edde746
|
a759e8b3c6 |
perf(jellyfin): fetch a detail item once when several callers want it at once
Opening a detail screen issued two identical full-detail GETs for the same id, concurrently: `_loadFullMetadata` calls `fetchItemWithOnDeck`, and `_initWatchlistState` calls `fetchExternalIds`, which fetches the same item purely to read `ProviderIds`. Playback start adds three more for its own id. Each of those makes the server rebuild the entire dto — `People`, `Chapters` and `MediaSources` cost a database query apiece and `Trickplay` costs several plus a filesystem stat — so the duplicate is expensive on both ends. `fetchItem` now shares an in-flight request per item id. Single-flight only: once a request settles the next caller re-fetches, so nothing can serve a stale item. Measured on a remote Jellyfin server, 12 interleaved show-detail opens per version: requests 4 -> 3, payload 28.4 KB -> 18.6 KB. Median wall time is unchanged (1394ms -> 1386ms) because the duplicate ran alongside the first rather than behind it; this removes duplicated work, not latency. Two things were tried and rejected because measurement did not support them: starting `/Shows/NextUp` in parallel with the detail fetch (the requests contend rather than overlap — NextUp went from 380ms alone to 1395ms beside it — and it costs a wasted request per movie), and dropping `Trickplay` / `Chapters` from the detail field set (no measurable effect; both are real data the playback path reads). Refs #1784 |
||
|
edde746
|
74d3af3ae1 |
perf(home): load the home screen once instead of twice per cold start
The Discover tab fanned out its whole request set twice on every cold start and replayed slow rows on a shrinking timeout ladder, so a healthy remote server produced anywhere from 4s to 15s of loading. Measured against a remote Jellyfin server with four libraries, 24 interleaved cold-start samples per side: requests 19 -> 9 payload 219 KB -> 94 KB settled 5231ms -> 2502ms median, 13222ms -> 5927ms p95 Four independent causes: - Retry policy. `Client.send` resolves on response headers, so the connect budget covers the server's think time and a slow-but-alive query raises `connectionTimeout`. Replaying it made the server re-run the query with a shorter budget than the one it just missed; the `[10s, 8s, 5s]` ladder turned an 11s answer into an empty row after 23s. Hub surfaces now get one whole-request deadline, retry only immediate connection errors, and the deadline bounds the whole call including the request still in flight. - Request shape. `/Items/Latest` groups a TV library by series, so its rows are Series folder dtos and `RecursiveItemCount`/`ChildCount` cost a DB count each, per row. Hub rows now ask for `Overview` only; watch state survives because Jellyfin derives `UserData.Played` from `UnplayedItemCount` when the count fields are absent. `/Shows/NextUp` sends `NextUpDateCutoff` to bound the server's series-key scan, and `Thumb` leaves `EnableImageTypes` since nothing reads it. `UserData` and `PremiereDate` leave the browse set: neither is an `ItemFields` member, so the server dropped them anyway. - Fan-out. Per-library hubs ran in batches of three separated by a barrier, so one slow library stalled every library behind it. A sliding window keeps the same peak concurrency without head-of-line blocking. Concurrent `fetchLibraries` calls now share one `/Views` instead of racing two identical round trips, Plex's global and music hub legs start together, and Jellyfin gets Plex's pool tuning. - Duplicate pass. `DiscoverScreen.initState` starts a load and the online-entry hook asked for a full refresh on top of it, which `CoalescedLoadCoordinator` correctly queued as a trailing pass. The hook now calls `primeRefresh`, which rides along with a load already in flight; profile switches still go through `fullRefresh`. Refs #1784 |
||
|
edde746
|
8624c37041 |
fix(profiles): notice a corrected connection creation time
ActiveProfileProvider diffed connections on toConfigJson alone, but createdAt is a real column and now decides which connection lends a profile its picture. A creation-time correction was therefore invisible to the guard and left a stale avatar until the next launch. Compare createdAt alongside the config. ConnectionRegistry pins creation order across re-authentication, so this adds no notifications in normal operation — it only stops an out-of-band correction, such as a restore or a backfill, from being swallowed. |
||
|
edde746
|
7a19f4149e |
fix(connections): keep a connection's creation time across re-authentication
ConnectionRegistry.upsert already preserved isDefault on conflict but rewrote created_at from the in-memory model. Re-signing in rebuilds the connection with DateTime.now() under the same stable id, so the row's creation time jumped forward on every reauth. That was cosmetic while created_at only drove list ordering. It is now behaviour: it picks which connection lends a profile its picture, so re-adding the originally-first connection could hand the avatar to a later one. remove() also promotes the oldest remaining row to default and was reading the same restamped value. Preserve the existing row's created_at on conflict, reusing the lookup upsert already performs for isDefault. |
||
|
edde746
|
860ce1e11a |
feat(profiles): show the first linked connection's user picture
A local profile had no picture of its own and always fell back to
initials. It now borrows the user picture of the connection it was
linked to first — oldest Connection.createdAt, ties broken by
connection id, since the join table carries no creation time.
Jellyfin links resolve to /Users/{id}/Images/Primary, keyed by the
PrimaryImageTag now captured at authentication and refreshed from the
/Users/Me body checkHealth already fetches. That endpoint is anonymous
on every Jellyfin release, so the URL carries no api_key and the access
token stays out of the image cache key. Plex links resolve the Home
user the link points at against PlexHomeService's live cache, so no
account-level lookup is needed and the picture tracks Plex's own
refresh.
The picture is derived per snapshot and never written back onto a
Profile: ProfileDetailScreen upserts the model it holds, so a
persisted URL would go stale and outlive the connection it came from.
Plex Home profiles are untouched, including one whose Plex avatar is
unset — it keeps its initials rather than borrowing a lent connection's
picture.
close #1667
|
||
|
edde746
|
2b4875d389 |
fix(player): keep hidden and cycled subtitles off in the next episode
Episode navigation carries the subtitle choice this screen has committed, so a way of turning subtitles off that the screen never sees is undone by the next episode. ExoPlayer has no renderer-level visibility switch, so the player's hide toggle is emulated by deselecting the track. That emulation lasted until the next selection: the automatic pass after an episode change put subtitles straight back on screen while the toggle still read "hidden", and un-hiding then restored a track id belonging to the episode that had already ended. Hiding is now sticky across media opens the way mpv's global sub-visibility is, selections made while hidden become what un-hiding restores, and the toggle no longer refuses to restore because the hidden track reads as Off. Cycling subtitles over the native track list — downloads, and items whose server exposes no subtitle rows — went straight to the track manager, which owns the player selection and the server write-back but not the committed choice. The screen records the cycled track now. |
||
|
edde746
|
e7aa1e4782 |
fix(jellyfin): stop overriding a server subtitle mode of None
Jellyfin answers PlaybackInfo with a null DefaultSubtitleStreamIndex when the user's SubtitleMode is None: the index is the server's whole answer, and null means it picked no subtitle. The mapper read null as "the server did not say" and promoted the container's default/forced flags to a server selection instead, which outranks the profile subtitle mode in the selection ladder. A viewer who had turned subtitles off for their Jellyfin user got them switched back on by every item that carried a default or forced row. Only the row the server names is selected now. A stream the viewer picks, and an explicit off, still survive per item because Plezy reports the index through playback progress and the server hands it back as that index or -1. close #1779 |
||
|
edde746
|
bbaf5f0f9e |
fix(music): replace the Instant Mix faders with a wand icon
The three vertical faders read as an equalizer in a music context and are the vertical twin of the video player's settings icon. Use wand_stars, which names what the action produces and collides with no neighbouring affordance in the action bar or the music context menu. close #1629 |
||
|
edde746
|
0f5e5c8b6e |
feat(music): offer File Info on tracks and other file-backed items
The context menu only offered File Info for movies and episodes, so a track's path, container, and audio stream detail were unreachable even though both backends already answer getFileInfo for them. Gate the entry on the new MediaKind.hasFileInfo instead of a literal kind list: movies, episodes, tracks, and clips are leaf items with real files, while shows, seasons, artists, albums, collections, playlists, and folders carry no Media/MediaSources and would only ever produce the "not available" snackbar. Also fix the Plex stream classifier, which mapped streamType 4 to an embedded image although PlexStreamType.lyrics is 4. Only music tracks carry that type, so a track's lyric stream rendered under "Embedded Images" with the video field block. Type 5 was invented outright and is now unknown. close #1747 |
||
|
edde746
|
a9f0532f5f |
fix(ui): keep pushed screens clear of the Android navigation bar
Plezy is edge-to-edge on Android whether it asks to be or not: targetSdk is 36, Android 15 enforces edge-to-edge for apps targeting 35+, and Android 16 disables the windowOptOutEdgeToEdgeEnforcement escape hatch. The only SystemUiMode.edgeToEdge call in the app fires on video-player exit, so on API 35+ the window is edge-to-edge from the first frame and MediaQuery.padding.bottom is a real ~48dp overlap under 3-button navigation. MainScreen's phone layout hides that. It supplies a bottomNavigationBar and never sets extendBody, so Flutter's Scaffold strips padding.bottom from the body MediaQuery and every tab is already safe. Routes pushed on the profile navigator are full-screen siblings of MainScreen with no bottom bar, so they receive the untouched inset and nothing consumes it - the last settings card and the final log lines render under the back, home, and recents buttons. Three shared hosts own most of those routes, so the inset is consumed there: FocusedScrollScaffold (25 screens, counting the SettingsPage wrapper) and FocusableDetailScreenMixin.buildDetailScaffold (4) now append a trailing SliverSystemBottomInset, and the four screens that build their own Scaffold around a CustomScrollView append it directly. The new widget codifies the convention this repository had already written down but open-coded - insets baked into the scroll content rather than a SafeArea around the scroll view - so content still paints under the bar while the scroll extent grows enough to bring the last row above it. It reads padding from its own context and collapses to zero height wherever the inset is already zero: desktop, Android TV, tvOS via _AppleTvScale, and inside MainScreen's tab bodies. No platform branching, and it stacks additively with the music detail screens' existing mini-player spacers, which is correct because the mini-player itself floats above the navigation bar on a pushed route. Scroll views that are not sliver lists take the inset in their own padding: the companion remote's ListView, the auth screen's scroll container, and the two SliverFillRemaining sign-in forms, whose children size themselves from the extent remaining before them and so cannot be helped by a trailing sliver. The logs empty state is left alone for the same reason inverted - it already fills the viewport, and a trailing inset would only add scroll slack. Verified on a Pixel 7 running Android 16 (API 36) with 3-button navigation: Settings, Logs, and Video Playback all end clear of the bar. close #1766 |
||
|
edde746
|
fb0613e3db |
feat(player): toggle playback on a two-finger tap without raising the chrome
A touch viewer had to raise the chrome to pause, which dims the picture and covers the subtitle line they were trying to finish reading. A two-finger tap now toggles playback with the chrome left down, so the frame that pauses is the frame that was on screen. It fires the moment the chord resolves, in every player state. The two-finger double tap no longer resets the video zoom. Keeping it would mean holding this toggle back for the double-tap window before acting, and pausing late is pausing on the wrong frame. Zoom reset stays in the video settings sheet, its presets and the keyboard shortcut, and pinching back to 100% now snaps exactly within three percent so touch has a one-gesture path too. Both chord actions share _mobileTouchGesturesAllowed, so the chord is inert under screen lock, in PiP and while the content strip is open; the zoom reset previously fired straight through a locked screen. close #1505 |
||
|
edde746
|
9c08c78f6d |
fix(plex): stop recording a second play when the server already logged one
Plezy reported a completed playback twice: the /:/timeline heartbeats let the server mark the item played on its own, and the in-player auto-scrobble then sent an explicit /:/scrobble for the same watch. On PMS 1.30 that adds a second Play History row; on 1.43 the row is suppressed but viewCount still lands on 2 for one playback. Measured against PMS 1.43 to find what the server acts on: a watched-threshold crossing observed inside one session. Consecutive above-threshold reports mark nothing, a resume point left by an earlier session does not arm a new one, and a report at position zero is inert while one at a single second is enough. So the explicit mark now goes out only for sessions that gave the server no crossing to observe. That decision cannot be made while the session is live. A session beginning past the threshold has no crossing yet, but rewinding and playing forward creates one, and the server records it — marking eagerly and then hitting that path leaves viewCount at 2 again. The mark is therefore deferred to the terminal stop, and rides its future so callers that await the stop before tearing the player down do not drop it. Deferring also covers a crossing coalesced away during startup and a seek back below the threshold before stopping. Crossing state is tracked from reports the backend actually received rather than from PlaybackReportSession.report()'s bool, which resolves true for a same-state snapshot dropped during startup. The same-file sibling hook (#1500) still runs exactly once, on the transition to a settled mark rather than at the local crossing, so sibling episodes are never marked watched while the episode actually played is not. Local watched state and Continue Watching removal still happen on the observed crossing, so the only behaviour that moves is the redundant server call. close #1740 |
||
|
edde746
|
95b013e155 |
fix(seerr): show worldwide popular titles in Explore again
Overseerr and Jellyseerr bind the `language` query parameter of `/discover/movies` and `/discover/tv` to `originalLanguage`, which becomes TMDB's `with_original_language`. Sending the app locale there collapsed both shelves to titles originally made in that language, so a Portuguese UI saw only Portuguese films. Those two routes take their display language from the instance/user locale, which already wins over the query value, so the parameter was pure filtering with no localization to show for it. Drop it from the two paged discover routes. Trending, both upcoming rows, search, details and recommendations keep it: Seerr treats it as the display language everywhere else. close #1763 |
||
|
edde746
|
d83d0790ba |
fix(exoplayer): match side-loaded subtitles after media3 rewrites track ids
Plex sidecar subtitles are attached as MediaItem.SubtitleConfiguration and tagged `external_<n>`, then recovered from the Format id the track selector reports. Since media3 1.3.0, DefaultMediaSourceFactory always merges side-loaded subtitles with the primary source and MergingMediaPeriod rewrites every child format id to "<periodIndex>:<originalId>", so the tag arrives as "1:external_0" - measured on device - or "0:1:external_0" behind the container-sidecar merge. The prefix test therefore never matched and every sidecar reached Dart as an embedded track with no URI. A Plex sidecar's only identity is its stream key, which the app carries in that URI, so both matchers failed on it: a server-selected sidecar could never resolve and left subtitle selection pending, and a manually chosen one could not be mapped back to a stream id to write to the server. The already-attached branch of addSubtitleTrack compared the raw id too, so re-selecting a loaded sidecar silently did nothing. Route every write and readback of the tag through ExternalSubtitleIds, which matches the final id segment, and cover it with an instrumentation test that side-loads a subtitle through the real media3 media-source factory. Also stop claiming a saved track selection when no server stream was identified - there is no local store, so that path silently dropped the user's choice. close #1713 |
||
|
edde746
|
bbed260169 |
fix(player): start the TV player with its chrome down
A television raised the whole OSD and timebar on every playback start. The chrome controller is born visible, and its auto-hide clock cannot arm until the first frame lands, so the controls did not merely appear early: they appeared exactly when the picture did, and then sat over the opening five seconds of every movie and episode. The timeline is gated behind the first frame, so the bar materialised on top of the video rather than over the loading spinner, which is what makes it read as a pop-up rather than as chrome that was already there. The route now opens with no chrome on TV. Nothing is lost: the loading spinner and buffering overlay are their own overlays, the screen focus node owns back, and the first D-pad press raises the controls the way it already does after every auto-hide. Pointer and touch platforms keep the chrome, where the viewer's hand is on the surface and the title and back affordance belong over the spinner. Initial presentation now follows initial visibility. They were separate: seeding only visibility would leave the route claiming its chrome was still presented, so PlayerNavigationCoordinator would read back as "hide the chrome", hide() would no-op against chrome that was never up, and the press would be swallowed instead of leaving the player. Controls that mount with the chrome already down now claim focus themselves. Focus normally reaches them through the hide transition, and their own autofocus cannot win it back because the screen node took it during the loading phase. Left alone, the screen node kept primary focus and its self-heal raised the entire OSD on the first D-pad press, which put the chrome straight back over the picture and bypassed the transient seek and transport indicators. Both player spinners now carry a label. They were bare progress indicators, so a screen reader announced nothing at all while the picture was coming up, and the TV Maestro flows had no way left to tell a loading player from a playing one once the Pause button stopped appearing on its own. The two TV flows are repaired to match. They waited on that button, and now wait for the labelled spinner to clear, which cannot happen before the media is opened. 05 additionally reaches Search by D-pad rather than a percentage coordinate, because a tap flips InputModeTracker to pointer mode and collapses the rail it is aiming at, and it gates on the play-next prompt's own Cancel action: "Next Episode" is also the credits skip button, so the old assertion could pass without the prompt ever opening. close #1765 |
||
|
edde746
|
35061f9f68 |
fix(jellyfin): scope global search to visible libraries
Jellyfin search rows do not expose their owning collection, so hidden libraries cannot be filtered after the response. Scope searches to visible libraries, stamp the returned rows, reuse the latest loaded views, propagate cancellation, and fail closed when views cannot be loaded. Keep full candidate budgets and split music libraries into parallel album, audio, and artist requests. Album requests disable UserData and use the existing album field set to avoid recursive per-album work from #1552; audio requests retain cheap leaf play state. close #1770 |
||
|
edde746
|
1d9ffb7427 |
fix(search): exclude hidden libraries from global search results
searchAcrossServers was the only aggregation entry point without a hiddenLibraryKeys parameter, so libraries hidden from home hubs, Continue Watching and the library rail still surfaced their contents in the Search tab. Thread the profile's hidden keys from SearchScreen through to the aggregation, and drop matching items between the fan-out and the ranking pass so hidden hits cannot spend the result limit and shrink what is shown. Items the backend cannot attribute to a library, such as Plex shared and external media, are kept. The screen re-runs the visible query when a library is hidden or unhidden while results are on screen. Its listener is attached only after the provider has hydrated, so the initial load notification cannot race the first query into running twice. Plex search rows now go through the library-aware tagger, so a response that names its section only via librarySectionKey or targetLibrarySectionID is still attributable, and therefore filterable. Jellyfin search results carry no library id at all: the mapper's ParentLibraryId is not a Jellyfin field, and ParentId resolves to a season or physical folder rather than a CollectionFolder. Filtering there needs server-side ParentId scoping and is left for a follow-up. close #1770 |
||
|
edde746
|
bac2a0d201 |
fix(player): keep Delete and Home editing text in player sheets
Bare Backspace and Home are player navigation keys, but they are also caret editing keys. The player screen's Focus wraps its OverlaySheetHost, so it saw them before the subtitle-search field could act: the press was consumed on key-down, DefaultTextEditingShortcuts never turned it into a deletion, and the back pipeline hid the chrome and then left the player. A focused text editor now takes both keys back, but only for physical keyboard presses — a synthesized dpad/gamepad press has no caret, and browserHome has no editing role at all. The screen also resolved its overlay-sheet controller from the State's own context, which sits above the host it was querying, so the lookup always returned null and Back skipped the sheet stage entirely. Resolve it from a context below the host instead, matching NowPlayingScreen. close #1741 |
||
|
edde746
|
2a7e5f4f9c |
fix(jellyfin): ask the server who may delete before offering it
Jellyfin never consults IsAdministrator when authorizing a library delete: BaseItem.IsAuthorizedToDelete looks at EnableContentDeletion and the per-library grant, and only the first user a server creates gets the former for free. Gating the "Delete from server" entry on the admin bit therefore offered a destructive action that answers 401 to later administrators, and hid it from plain users who do hold the grant. Ask the server per item instead, through the new MediaDeletionPermissionClient capability: BaseItemDto.CanDelete already folds the global grant, the per-library grant, and item state such as missing files or an in-progress recording. The probe runs when a menu opens on a deletable kind, costs ~0.5 KB, carries a whole-request deadline because the client's own budget covers connect and receive separately, and fails closed on anything unknown. Plex keeps its account-level owner/admin gate; it has no per-item permission on the wire. close #1749 |
||
|
edde746
|
bc0d14a749 |
fix(explore): list every library copy of a title, not one per server
`MediaServerClient.findByExternalIds` returned `MediaItem?`, so the Explore "In these libraries" chooser could never show more than one copy per server. A movie held by both a 4K library and an HD library on one Plex server therefore resolved to whichever copy came back first, with no way to reach the other. Return every id-verified match instead. `/library/all` is already server-wide and each `Metadata` entry carries its own `librarySectionID`, so both copies come back labelled with no extra request; Plex was simply taking `Metadata[0]` and the title ladder was returning on its first hit. An exact-guid hit no longer short-circuits the title search either — a library still on a legacy agent has a different primary guid and is invisible to the `guid=` filter. Copies are deduped by global key and ordered best-first, and each row now states its resolution, since library names need not mention it. Resolution passes merge rather than replace: the cross-server fan-out logs and skips per-server failures, so a later pass can come back short a server that answered an earlier one, and a failed pass no longer claims the title left the library. Duplicate keys fold field by field, because Jellyfin's library stamp is a best-effort ancestors lookup that returns the item bare when it fails and an unstamped row is indistinguishable from its sibling. Focus nodes are keyed by copy and reclaimed after a merge re-sorts the rows, so a dpad user is not thrown to a different copy. close #1754 |
||
|
edde746
|
f78f65faf5 |
chore(player): report marker counts when loading playback extras
The extras loader logged only the chapter count, so a user report of "auto skip never fires" could not be told apart from "the server has no intro marker for this item" — the two need opposite fixes. Log the marker count and types on all three load paths, including the cache-only one that previously logged nothing at all. Drop PlexVideoPlaybackData.markers while here: the playback-start parse filled it on every item and no caller ever read it, because the player controls fetch their own PlaybackExtras. Document why getPlaybackExtras may serve the shared metadata cache row without a freshness check: getPlaybackInitialization refreshes that row network-first before the controls mount. That ordering is what makes cache-first correct, and nothing said so. |
||
|
edde746
|
957711a650 |
fix(startup): lead the damaged-store screen with the repair, not retry
A reporter on #1732 ran three successive builds against a preference store of 10336 bytes, every one of them zero, and reported each as "still failing". The gate classified it correctly every time and the consented repair would have cleared it in-process, but nothing on the failure screen said so: Retry was first, styled `FilledButton`, and autofocused, while `Repair storage` sat beside it as a tonal afterthought. Retry re-reads the same document, so for a corrupt-store failure it is an action that cannot succeed however many times it is pressed — and it was the one the screen recommended. Repair now takes the primary styling, the focus node and first position whenever it is offered, and the body text says plainly that retrying will not help. Retry keeps its place for every other failure, where a locked database or a denied directory really can change between attempts. The consent dialog was also promising an outcome it could not always deliver. Servers and profiles survive a repair only because their tokens are ciphertext in the database and the key that decrypts them lives in the store, so a store the key cannot be read out of signs the user out of everything — exactly the all-zero case. `PrefsRecovery.previewSalvage` reads the damaged file without touching it, and the dialog now names the real cost from that. The retained copy is labelled as holding credentials unless the bytes prove otherwise: what the salvage recovered says nothing about what the file still contains, because a store truncated mid-value keeps most of a vault key in plaintext while the salvage pattern — which needs the value's closing quote — matches nothing at all. Only an all-zero file drops the warning, so the one case that cries wolf is the one that provably holds no secret. `describe()` finally carries whether a repair was on offer. That line is the difference between a report a maintainer can act on and two days of guessing whether the button was even on screen. close #1732 |
||
|
edde746
|
2cb2c3eb95 |
feat(ratings): show every rating source the server already sent
Plezy rendered exactly one score per item. MediaRatingBadge._ratingDataFor took `rating` and fell back to `audienceRating` only when it was null, so a Plex movie carrying four attributed scores surfaced one, and which one was whatever the server happened to put in the scalar slot. #1755 asked for a setting to choose the source; showing all of them answers it without one. The data was already on the wire and being thrown away. `/library/metadata/ {id}` returns a `Rating[]` child array — IMDb, both Rotten Tomatoes panels, TMDB — with no extra query parameter, but PlexMetadataDto declared no field for it, so json_serializable dropped the key. The identical parse already existed in plex_catalog_source for the Explore tab and had simply never been wired to library items. Model the scores as a list rather than widening the scalar pair. The neutral MediaItem gains `ratings`; PlexMediaItem loses audienceRating, ratingImage and audienceRatingImage, which the list subsumes — Plex sends those images on listings too, so the same field covers both response shapes and no caller narrows to a backend type to read a score any more. CatalogRatingSource is promoted to lib/media as MediaRatingSource instead of growing a second near-identical type beside it, and plex_catalog_source's _ratingsFor becomes the shared plexRatingSources so one implementation serves both paths. There is no persistence to migrate: MediaItem.toJson has no production caller, the offline path re-parses raw Plex JSON through the same mapper, and Plex's audienceRating sort is server-supplied data, not a model read. Cards and the dashboard still show fewer scores than detail screens, and that part is a real Plex limit rather than a shortcut. Section listings send only the scalar pair; includeRatings, includeElements=Rating, includeFields=Rating, includeChildren and includeExtras were each probed against a live server and none surfaced the array, while includeGuids=1 demonstrably does add Guid[] — the probe works, the parameter does not exist. Hydrating every card would be one request per row, so listings render whatever their own response carried, which is one or two attributed scores rather than the single one they showed before. Jellyfin has no per-source array at all: the server collapses whatever its fetchers found into CommunityRating and CriticRating. CommunityRating's provenance is unknowable from the DTO — TMDB vote_average, IMDb via OMDb or a local NFO, last writer wins — so it stays the generic `audience` source with no brand mark. CriticRating is the Rotten Tomatoes Tomatometer as a 0-100 percent and is divided by ten explicitly rather than folded by magnitude, because a Tomatometer of 9 means 9% and range-sniffing would have promoted a rotten score to fresh. Photo rows are skipped, since Jellyfin reuses CommunityRating for the EXIF 0-5 star. The badges share one slot on every surface. On the phone hero the scores go in a single pill because that chip row is a height-clipped Wrap and a chip per source would push year, certification and runtime out of the visible band on short heroes; on the TV detail line and the dashboard spotlight the group occupies the one metadata slot so bullet separators do not multiply. The group announces itself as a single semantics node naming each source, because a bare row of four percentages tells a screen reader nothing about which score is which. rating_utils drops parseRatingImage and isRottenTomatoes — the URI vocabulary now lives only in the Plex mapper — and the source-key resolver and label map, previously private to the Explore detail screen, become the shared pair both screens use. The label strings move from explore.ratingSource to common.ratingSource accordingly, which costs no translations because every non-English value was empty; running clean_translations also scaffolds startup.quitPlezy and startup.restartRequiredBody, which were already drifted. Verified against the live server the probes came from: a detail response now yields TMDB 83%, IMDb 8.3 and Rotten Tomatoes audience 96% through the production mapper and badge resolver, and the listing response for the same title yields TMDB 83% alone. Both payloads are pinned verbatim as fixtures. Coverage adds mapper ordering, dedupe against the array's repeat of the scalar, out-of-range rejection, the Jellyfin scale and photo guard, the CatalogItem conversion that feeds Explore's dashboard hubs, and the three render surfaces including the semantics announcement. close #1755 |
||
|
edde746
|
395798f28e |
fix(player): stop handing ExoPlayer the demuxer's buffer budget on Auto
On Auto, Dart derives a buffer size for mpv's demuxer from the device heap and sets it as `demuxer-max-bytes`. The Android player forwarded that same number to `DefaultLoadControl.setTargetBufferBytes`, so ExoPlayer's sample allocator was sized by a tier table written for a different consumer: 64MB on any device whose large heap is 512MB or less, which every Shield is. `targetBufferBytes` is a byte cap, so the media it represents collapses as bitrate rises — 64MB is 53s of a 10 Mbit/s stream but 5.2s of a 103 Mbit/s UHD remux. With `prioritizeTimeOverSizeThresholds` false the cap is hard: `shouldContinueLoading` returns false the moment the allocator reaches it no matter how little media that is, and `shouldStartPlayback` reports READY off the same byte term. Read-ahead that short starves the audio sink in bursts, and on a passthrough route that is enough to keep the AudioTrack from ever starting — the track initializes, accepts one access unit and never renders a frame. Because an enabled audio renderer owns the MediaClock, the whole player freezes and the black-screen watchdog then blames the video decoder and drops the session to mpv. Size the LoadControl target natively instead, from what actually bounds `DefaultAllocator`: the Java heap. `min(media3's own default for a video+audio selection, largeMemoryClass/4, availMem/4)` with a 32MB floor, the lowest tier that has already shipped. The quarter matches the threshold the Buffer Size setting already warns at, and the media3 default is a ceiling — this is not "buffer more than upstream", it is "stop buffering less". Deliberately not bitrate-aware, because the LoadControl is built during initialize, before any media is opened. `bufferSizeAuto` carries the distinction over the channel; `bufferSizeBytes` still travels with it because the plugin's mpv fallback replays it as a real demuxer property, and an explicit Buffer Size choice is still honoured verbatim. Confirmed against the hardware in the 2.9.1 passthrough report. That reporter's own log is a natural A/B: three runs at 64MB fail with `0 frames rendered after 8002ms`, spanning both DV conversion modes and both tunneling states, while the single run after he manually selected 128MB logs `Position advancing` and renders. Reproduced on the same Shield model with codec and bitrate held fixed and only the cap varied — 6s of audio demand stalls at 64MiB and plays at 128MiB, 4 of 4 predictions, with read-ahead measured off an injected DefaultAllocator at 65 664 and 131 776 KiB. That device reports `dalvik.vm.heapsize` 512m, so the heap term binds first at every free-memory level in his log and Auto now derives exactly the 128MB he had to pick by hand; the shipped path logs `Buffer: 128MB limit (auto, heap=512MB, available=568MB)` where it previously logged 64MB. |
||
|
edde746
|
3f49bcabf8 |
fix(prefs): replace the desktop preference store atomically
Upstream shared_preferences_windows and _linux write the whole preference document with a bare `writeAsStringSync`. That opens with the default `FileMode.write`, which truncates the live file before writing it, so every single preference write has a window in which the only copy on disk is empty or half-written. A crash, power loss, forced reboot or antivirus interception inside that window leaves a document that fails to parse on every subsequent launch — and the store holds the credential-vault key, so the loss is not recoverable by rewriting it. This is the corruption class behind #1732; the recovery path already landed is a band-aid over it. Vendor both packages under packages/ — the convention saf_util and wakelock_plus already follow — and stage, flush, then rename over the target. The flush has to precede the rename or it could publish contents that were never committed, the same corruption by another route. Staging uses one fixed sibling name rather than a stamped one, because the file is a plaintext copy of the vault key, tracker refresh tokens and Seerr cookies; it is created in the target's own directory so rename stays on one volume and the mode matches what the canonical file would have had, and a stale one is swept once the canonical document has been read cleanly. Both deltas are marked in-source and in provenance.json with the refresh contract. Atomicity is proven, not asserted. A hard link to the store observes the old document after a write, which only holds when the directory entry was replaced — truncate-in-place would have rewritten the shared inode, and that test does fail against unpatched upstream. Upstream's own suites still pass unchanged in both packages and now run in CI, so the patch keeps the contract it inherited. Windows `MoveFileExW` replacement semantics cannot be proven on a POSIX runner or a memory file system, so they get their own test on the existing windows-latest job, including replacement while a reader holds the file open — antivirus and Search Indexer both do. |
||
|
edde746
|
9ecf8db90f |
fix(startup): stop offering Retry after a repair that needs a restart
A seed-and-restart repair writes the salvaged credentials straight to disk and leaves this process's store closed, because the plugin still holds the bad document in memory. repairCorruptStore says so plainly — "nothing may write a preference before that restart … the caller keeps the app on the failure screen precisely so nothing does" — but the caller did not. Clearing the repairing flag re-enabled Retry, and pressing it reopened onto the stale map, whose first write would flush it back over the seed and orphan every ciphertext token in the database. The repair hook returned a bare bool, which cannot express the difference between "retry now" and "never retry in this process", so replace it with StartupRepairResult. The restart case latches terminal state on the bootstrap, withdraws Retry and Repair rather than grey them out — a disabled control still invites another press — and says what to do instead, which nothing did: repairNeedsRestart was a dialog title with no body anywhere. Desktop gets a Quit button through the existing AppExitService seam; Copy and Upload stay live everywhere, because a stuck user still needs the diagnostic out. close #1732 |
||
|
edde746
|
3ae7aa554b |
fix(prefs): recover a preference store whose bytes are not valid UTF-8
`File.readAsString` reports a UTF-8 decode failure as a FileSystemException, not a FormatException, so three guards written for that case never ran. The preflight's `on FormatException` branch was unreachable and its `on FileSystemException` sibling waved the document through; the plugin then threw the same FileSystemException, which failed the FormatException/TypeError test that decides repairability; and quarantine's lossy-decode fallback sat dead behind a rethrow. A store with one bad high byte — a UTF-16 BOM, a stray 0x80 — therefore reached the user as a failure screen with no Repair button and no way forward at all. Read bytes and decode explicitly instead, at both sites. Classification moves into describeStoreDamage, so a failure that surfaces after the preflight passed is judged by re-reading the file rather than by the error's type: a denied or locked store is indistinguishable from a decode failure by type or message, and offering a destructive repair for a permissions problem would reset every setting and risk the vault key over something a chmod fixes. isCorruptStoreError went with it, having no remaining callers. A repair that quarantines the store and then cannot reopen it no longer strands the process either. The repaired future was built straight from the cache loader, bypassing the self-healing reset sharedCache installs, so a failed reopen parked a rejected future in _cacheFuture and every later attempt replayed that stale error — with the damaged file already moved aside, so a restart would have booted cleanly. CorruptPreferenceStoreException now carries reopenSafe and a derived, content-free shape: byte length, whether it decoded, whether every byte is zero. #1732 arrived as "FormatException at offset 0" and nothing else, which cannot separate an all-zero file from a non-JSON first character from bytes that are not UTF-8; these can, and never quote the document. Cover the loop against the real desktop backend rather than a fake. shared_preferences_linux is pure Dart, byte-identical to the Windows implementation, and exposes fs/pathProvider, so pointing it at a temp directory exercises the genuine read, parse, cache and write path on any host — the join between preflight, classification and reopen where every one of these defects lived, and which had no coverage at all. |
||
|
edde746
|
3509f4b989 |
docs: vendor the Microsoft Store badge as a PNG
GitHub sized the hotlinked SVG from its 161x44 intrinsic box rather than the img height attribute, so the badge rendered short beside the other three. rsvg-convert at exactly 4x intrinsic keeps the aspect ratio bit-identical and the rounded corners transparent, matching the neighbouring badge assets. All four now render 60px tall, and the README no longer hotlinks any image. |
||
|
edde746
|
8a46df2850 |
fix(player): keep live TV on its retry ladder when a stream 404s
The 404 branch added in 16668be5 ran ahead of the live-TV fallback chain, so a transient live 404 — an HLS segment rolled off the playlist, or a transcode session restarting under us — showed "file unavailable" and killed a stream the bounded ladder would have recovered. Only on-demand playback can read a 404 as terminal, where it really does mean the file is unreadable. 500 stays terminal for both, since a limit rejection is not something a retry clears. The dispatch lived in a private extension on the screen state, where no test could reach the decision. Extract it as resolvePlaybackFailureAction next to runLiveStreamRetry, which already sets that precedent, and cover both the live and on-demand paths plus the ladder's rungs. |
||
|
edde746
|
56ad48824b |
fix(jellyfin): pin MediaSourceId on every static stream URL
Jellyfin has no DirectStreamUrl field — MediaSourceInfo carries only
TranscodingUrl, and a DirectPlay decision returns no URL at all, leaving the
client to build /Videos/{id}/stream itself. The branch reading
DirectStreamUrl was therefore dead against every Jellyfin version, along with
the 'DirectStream' play method and the doc comment promising both.
The static URL also dropped MediaSourceId whenever the item had a single
source whose Id equalled the item id — an ordinary episode. The streaming
endpoint resolves a blank MediaSourceId to its own first sorted source
(VideoFile first, then widest video), so the omission silently streamed a
different file as soon as the item gained an alternate version. Forward the
id the negotiation settled on, as jellyfin-web, Findroid, and Streamyfin all
do unconditionally.
Every "pinned" fixture used a source id that differed from the item id, so no
test exercised the shape that dropped the param; add one that does.
|
||
|
edde746
|
4fe4f7b1d7 |
fix(mpv): stop loading the ytdl hook for media-server streams
Every URL the player opens is a media-server stream or a local file, so mpv's bundled ytdl_hook has nothing to resolve. It still ran an on_load hook per open and, whenever an open failed, spawned yt-dlp with the full stream URL in its argv — access token included, readable through /proc on Linux. It also added ~700ms to every failed open and buried the real "[stream] Failed to open" line under three ytdl_hook errors. mpv decides whether to load the builtin script inside mpv_initialize, so this has to be an option set beforehand rather than a property set from Dart. Verified against mpv 0.41: --ytdl=yes logs "Loading lua script @ytdl_hook.lua", --ytdl=no never loads it. Apple is deliberately excluded: the bundled libmpv is built without Lua, so the option does not exist there and setting it would only print an mpv error on every player init. |
||
|
edde746
|
86c8011b72 |
fix(player): tell the user when the server cannot read the media file
A 404 on the media stream means the server resolved the item but could not open the file behind it — moved, deleted, or on storage that went away. Jellyfin maps the resulting FileNotFoundException to 404, and PlaybackInfo never stats the file, so negotiation succeeds and only the stream request fails. Playback then died with a snackbar reading "Failed to open [REDACTED_URL]" before popping the route, which tells the user nothing and leaves nothing useful in a bug report. Generalize the HTTP-500 log probe into PlayerError.httpStatusFromLog and latch every status in fatalPlaybackHttpStatuses. Each latches on its own so the 503 that stream-lavf-o deliberately retries cannot mask the fatal status behind it. A 404 now raises a dedicated modal naming the cause and the fix. On Android a 404 previously failed the "Response code: 500" string test and fell through to the ExoPlayer→MPV fallback, showing "switching to compatible player" before failing again on the same request. Read the real status off HttpDataSource.InvalidResponseCodeException instead and skip the fallback: an HTTP status is not a codec problem. |
||
|
edde746
|
6f9edd3e93 |
fix(startup): make the deferred crash report survive its races
The persist-then-flush model had four ways to lose or corrupt the record it exists to protect. A no-op hub — which is what a failed or timed-out crash-reporting init leaves behind, because that phase is best effort — accepts an event and returns an empty id without throwing. "Did not throw" was treated as delivery, so the record was marked reported and suppressed forever. Delivery now requires a non-empty Sentry id, and init completion is tracked explicitly rather than assumed. Opting out, and building without a DSN, are deliberate suppression rather than delivery failure: both mark the record resolved so it is not rediscovered every launch. Everything else stays pending, and consumption no longer deletes an unreported record — deleting it ended the only retry there was, which made "the next launch tries again" false. The write path is now a queue. Record writes were launched unawaited from the failure path, so a fast retry could flush before the file existed, consume before a late write landed, or run two writers against one file and let the older one finish last. markReported joins the same queue and compares record identity before rewriting, because reading and writing outside it let a concurrent record land in between and be overwritten by the record it had just superseded. Records carry an id so that comparison is meaningful. Consumption also waits on a registered flush, so the success path cannot delete the file mid-send. Also routes the tvOS recovery marker through the tolerant read. reconcile() runs inside AppDatabase.open, a fatal gate step, so a wrong-typed marker vetoed the launch outright on a first-class TV target. Both new guards have regression tests verified to fail without the fix. |
||
|
edde746
|
9555937873 |
fix(startup): defer crash reports until the reporter exists
Reporting the failure inline was wrong for the phase that matters most. The gate opens preferences before SentryFlutter.init, so a corrupt or unreadable store — the likeliest cause of #1732 — was captured by a NoOpHub and silently discarded, which is exactly the telemetry gap the previous commit claimed to close. Initialising the reporter earlier is not an option either: `_beforeSend` reads the crash-reporting opt-out from settings, so events raised before settings load would bypass a user's choice. Every failure is now persisted first and flushed once the reporter is up with settings loaded, which in practice is the user's own retry seconds later in the same process. Records carry a `reported` flag so a send happens exactly once, and a failed send leaves the flag clear so the next launch tries again. The flush reads without consuming, so the record still reaches Settings > Logs. Also routes the tvOS recovery marker through the tolerant read: `reconcile()` runs inside `AppDatabase.open`, a fatal gate step, so a wrong-typed marker vetoed startup outright on a first-class TV target despite the new default-instead-of-veto behaviour. An unreadable marker tells us nothing, which is the same position as an absent one. |
||
|
edde746
|
66549e3a67 |
fix(prefs): route every credential read through the tolerant path
The wrong-type recovery only covered reads that went through a BaseSharedPreferencesService instance. The three stores that hold credentials read the shared cache directly, so a mistyped value there still threw a raw TypeError or, for Seerr, was swallowed by a catch-all and reported as "no session" — the registry documented protection it did not actually provide. readPreferenceTolerantly now takes the cache, so CredentialVault, TrackerAccountStore and SeerrSessionStore get the same classification as the settings layer. CredentialVault's post-write re-read moves outside its catch: a wrong-typed value written by another isolate was swallowed there, and the process then returned a key that never durably landed, making every ciphertext written under it unreadable on the next launch. Those stores are consulted long after startup, where a throw is an unhandled provider error rather than a repair prompt, so SettingsService initialization now walks the cached key set once and reads every sensitive key. That puts the failure inside a fatal gate step while the store is still open and a surgical single-key repair is possible. The remaining direct reads in settings and storage are routed too; the only ones left are the library-density dual-type migration, which probes both types deliberately, and an untyped switch that is type-safe by construction. |
||
|
edde746
|
7f0cad339c |
fix(startup): report and repair a failed launch instead of showing "Error"
Since 2.10.0 the whole app sits behind one all-or-nothing initialization gate, and that gate discarded the only evidence of its own failure. It caught the error, logged nothing but `error.runtimeType`, rendered an icon plus the word "Error" plus Retry, and never reported the error because catching it kept the crash reporter from ever seeing it. There is no log file on any platform, the buffer is in memory only, a double-clicked Windows release build has no console, and the log viewer lives in Settings, behind the gate that just failed. #1732 is the result: a Windows 11 user whose app will not boot and who cannot produce a single byte of diagnostic detail. The gate now names its phases. Each step is wrapped so a throw carries the phase it came from, replacing a `Future.wait` that discarded every error but the first and could not attribute it to any of four concurrent steps. The failure screen renders the phase, the exception type, the message and an expandable stack, plus copy and upload actions that reuse the existing log-relay flow. The record is persisted next to the database so the next successful launch can surface it in Settings > Logs, and it is reported to the crash reporter explicitly. Only preferences and the database still gate the launch. Window chrome, locale, crash-reporting init, TV/performance detection, the image-cache budget and download storage are best-effort and time-bounded, so a stalled platform thread degrades instead of holding the splash forever. Sentry no longer receives the startup work as its `appRunner`: that made a startup failure indistinguishable from a Sentry failure, and the guard would then have re-run migrations and the database open a second time. The two remaining fatal steps become recoverable. Preference reads tolerate a value whose stored type no longer matches, dropping the key and defaulting instead of failing the boot. A store that cannot be parsed is detected before either desktop plugin backend can memoise it, which is what makes an in-process repair possible at all. Repair is never automatic: it states what it will cost, salvages the credential-vault key and every tracker and Seerr session it can validate out of the damaged bytes, reseeds them, and moves the original aside rather than deleting it. Servers and profiles survive a salvaged key because their tokens are ciphertext in the database; tracker and Seerr sessions are plaintext preference entries, so the copy says they may still need reconnecting. Nothing derived from the store reaches a diagnostic. `FormatException` prints an excerpt of whatever it failed to parse, and during startup that document holds the vault key, refresh tokens and session cookies while the redaction manager still has nothing registered, so the wrapper keeps only the cause's type and offset and the record is an allowlist of already-redacted fields. The quarantined copy is labelled as containing credentials, is never offered for upload, and can be deleted from the dialog. Also self-heals orphaned WAL/SHM sidecars on desktop rather than only tvOS, makes every `createTable` migration step idempotent, keeps MSVC link by-products out of the Windows bundle, and asserts bundle contents in CI. Refs #1732 |
||
|
edde746
|
7c515bf8fa |
feat(website): serve Windows from the Microsoft Store and tag store campaigns
The Windows button downloaded plezy-windows-installer.exe from the latest release. It now opens the Store listing, which brings Store-managed updates. The endpoint redirects to ms-windows-store://, so the button only resolves on Windows; macOS and Linux keep their direct release downloads. Store links carry campaign parameters (ct=Landing, utm_campaign=landing, cid=landing) so landing-page traffic separates from the README's in each store's own reporting. Play reports utm_source and utm_campaign, so no utm_medium is sent. Structured data keeps untagged canonical URLs: schema.org offers are consumed by search engines, and a rich-result click is not landing-page traffic. |
||
|
edde746
|
f30e2c621a |
docs: refresh readme features and download channels
The features section last changed substantively in
|
||
|
github-actions[bot]
|
dc5a92a2e0 | chore: bump version to 2.11.1 | ||
|
edde746
|
d55b875855 |
fix(tvos): raise the system keyboard on arrival, not on every focus
Apple TV single-line fields moved to the engine's UITextField proxy in
2.10.0 (
|
||
|
edde746
|
944a8d89f5 |
feat(windows): package for the Microsoft Store as an MSIX bundle
The Store's unpackaged EXE path would require Authenticode-signing the installer and every PE file inside it. MSIX submissions are re-signed by the Store instead, so this route needs no code-signing certificate. build-msix.ps1 mirrors build-installer.ps1 and consumes the same per-architecture build artifacts, leaving the installer, portable archives and WinSparkle appcast untouched. One template generates the manifest for both architectures, carrying the identity reserved in Partner Center. check_windows_msix.py recomputes the package family name from the publisher DN, so a mistyped identity fails CI rather than a submission, and it parses the script rather than running it because root CI is Linux. Qualified logo assets are indexed into resources.pri; without the altform-unplated variants the shell draws the taskbar icon on an accent-coloured plate. PlatformDetector.isPackagedInstall gates the in-app updater and the Liberapay tile, which the read-only package directory and Store commerce policy respectively rule out. Gating at runtime keeps one Windows build feeding both the installer and the Store package. |
||
|
edde746
|
834895486b |
style: apply dart format to six drifted sources
Formatting was clean through |
||
|
edde746
|
4c8272d5b1 |
refactor(trackers): drive Trakt through the tracker coordinator
Trakt was the one service outside the tracker abstraction. TraktScrobbleService re-implemented the whole playback lifecycle beside TrackerCoordinator, and TraktSyncService pushed watched state from its own WatchStateNotifier subscription, so the player called two objects at every lifecycle point and one watch could be written twice. TraktTracker now implements RealtimeScrobbleTracker like Simkl; the duplicated player call sites collapse to one each, and Trakt shares the coordinator's ID resolver instead of re-fetching show ids every episode. Capabilities are split so a tracker declares what it is rather than being special-cased: ScrobblePolicy carries each service's own resend/seek rules, EpisodeHistoryTracker names the remote row a per-item history write targets, and SeriesProgressTracker covers one-counter-per-series services. Writes from all four trackers go through a shared TrackerWriteQueue, generalised from the Trakt-only queue, with the legacy Trakt payload migrated on load. Trakt becomes the fourth TrackersProvider slot and TraktAccountProvider is deleted, so one object owns the active session per profile. Two failure paths found while consolidating are fixed here too. The queue's retries only ran on profile bind, connect and app foreground, so a network blip mid-session left queued watches waiting for the next foreground. OfflineModeProvider now notifies on connectivity changes, not just offline-state or WiFi-flag changes, and main.dart flushes the queue when the network returns. The queue also counted every failure toward the five attempts that permanently drop an item, so a rate limit or a service having a bad hour could discard a pending watch - the loss the queue exists to prevent. Only an answer about the write itself now spends an attempt: 4xx counts, while rate limits, 5xx, recoverable token-refresh failures and requests that never arrived do not. A back-off answer also defers that service for the rest of the flush, so a queue holding many rows does not fire all of them at a service that just asked for quiet. |
||
|
edde746
|
5a25c1f9cc |
feat(simkl): report playback progress while it happens
Simkl only heard about an item once playback crossed the media server's watched threshold, so stopping partway recorded nothing at all: no resumable position, no watch. Drive Simkl's /scrobble/start, /pause and /stop from the player lifecycle instead, carrying the measured progress. Seeks report nothing, as Simkl asks. The terminal stop owns watched state for in-player playback, so real-time trackers are excluded from the threshold markWatched fan-out and one watch never produces two writes. Progress is reported as measured — it doubles as the user's resume position — so when a server threshold configured below Simkl's own 80% rule would leave the watch unrecorded, the tracker records it through /sync/history rather than inflating progress. Manual, container, offline-replay and external-player marks keep using /sync/history. Only /scrobble/stop accepts a 409, which is the sole action documented to return one. Reports go out one at a time because Simkl serialises scrobble writes per user and fails queued ones with a 400; overflow sheds the oldest non-terminal report so an episode swap cannot drop the previous item's stop. A playback session is pinned to the account bound when it began and every send re-checks that binding, so a profile switch or a disconnect/reconnect can neither redirect a queued report nor misfile the watched fallback. Also close the paths that lost the terminal report entirely: app exit flushes it instead of dropping it, the desktop window button goes through the app shutdown rather than exit(0), a detached VOD player reports a stop, and a finished item reports completion at EOF instead of waiting for teardown. A session that opened at 0% is still closed on stop, or Simkl keeps showing the item as playing until its runtime elapses. close #1719 |
||
|
github-actions[bot]
|
97cb98526e | chore: update cask to 2.11.0 | ||
|
github-actions[bot]
|
c90bc1629a | chore: bump version to 2.11.0 | ||
|
edde746
|
88ffe0806d |
test(automotive): assert the picture-in-picture vetoes on every host
|
||
|
edde746
|
0a6865fa18 |
fix(macos): unbound the AVFoundation AO's PCM lookahead
MPVKit 1.0.15 bounded how far ahead ao_avfoundation enqueues PCM on macOS — about 450ms of queue against the renderer's own ~1.7s — and disarms the feed between refills, re-arming from a half-bound timer. 2.10 is the first release to carry it: the AO pin went 1.0.12 to 1.0.16 over that release. #1711 reports macOS audio skipping roughly every half second on 2.10 that 2.9.1 does not have, and that bound is the only change to this path in the window, so restore the renderer-owned depth 2.9.1 shipped. The option documents 0 as exactly that. The AO itself stays. allowedAudioSpatializationFormats is a property of AVSampleBufferAudioRenderer, and the compressed E-AC3 JOC sink lives there too, while ao_coreaudio drives the HAL device and exposes no spatialization control at all — CoreAudio is the fallback, not an alternative. The cost is the latency the bound was added to remove: mpv multiplies --volume into the samples as it hands them over, so a volume change stays inaudible until the renderer queue drains. That is 2.9.1's behaviour, and the fix for it belongs to the AO's gain domain rather than to how far ahead it may buffer. Verified against the pinned MPVKit 1.0.16 libmpv on macOS: both option writes are accepted, playback lands on ao_avfoundation and advances at 0.997x real time. Runner's native suite passes. |
||
|
edde746
|
27b994422c |
feat(player): optionally follow the server's per-episode track selections
With the new playback setting enabled, episode advance carries no audio or subtitle preference at all, so both resolve from the streams selected on the server for each individual episode. This serves setups that curate selections server-side (e.g. Plex Auto Languages) and is independent of "Remember track selections", which keeps gating only the write-back of manual changes. close #1717 |